Home / All / Pillow Block Bearing /

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING
UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARINGUCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARINGUCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARINGUCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARINGUCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING
  • Price
  • US $2.71/piece
  • Model
  • UCFL206
  • Unit Price
  • Order QuantityUnit PriceDelivery period
    1 - 2000US $2.71 /piece7 day
  • Quantity
  • piece
Detail Information
  • Color:Green
  • d:30 mm
  • L:80 mm
  • H:148 mm

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING

UCFL206 bearing
Product Name
Pillow Block Bearing UCFL206
Structure
Pillow block Bearing
Locking Device
Set Screw
d
30 mm
Seal Type
Contact
L
80 mm
Set screw
 M6x0.75
H
148 mm
Hexagonal key size for set screw
3 mm
Designation, housing
FL206
Recommended tightening torque for set screw
4 N·m
The Designation, Radial Insert Ball Bearing
UC206
Recommended diameter for attachment bolts, mm
14 mm
Sealing solution
Standard seals with additional flingers
Total height unit
 40.2 mm
A
30 mm
T min.
-20 °C
Product weight:
0.9  kg
T max.
100 °C
Housing Material
Cast Iron
Mounting Hole Center-to-Center (e)
117 mm
Dynamic Load Rating (Cr)
19.5 kN
S
15.9 mm
Static Load Rating (Cor)
11.2 kN
Mounting Slot Width (S1)
19.05 mm
Lubrication
Non-Relubricatable
N
16 mm
UCFL bearing drawing
UCFL bearing

UCFL206 Bearing Features

  • UCFL206 bearing is composed of a ball bearing and a diamond-shaped bearing housing. It can be installed on the vertical side of the machine.

  • Compared with the square bearing housing, diamond-shaped pillow block bearing has less installation space, component quality has also decreased.

  • 2 mounting bolt holes center distance of diamond-shaped bearing housing is the same as the square bearing housing’ So they are interchangeable with each other.

  • When Install the bearing housing on the main body of the machine you must use both 2 bolts.

  • Main application: Roller conveyor, Machines with small installation interval, etc.

UCFL206 Pillow Block Bearing Cleaning and Inspection


Cleaning


When removing the bearing for inspection, first take pictures and other methods to make appearance records. In addition, confess the amount of remaining lubricant and sample the lubricant before cleaning the bearing.


Inspection


In order to distinguish whether the removed bearing can be used from scratch, it is important to check its standard accuracy, rotation accuracy, internal clearance, and wear of the cooperation surface, raceway surface, holding frame, and sealing ring. The inspection effect can be distinguished and judged by a conventional bearing or a reasonable user who knows the bearing. In addition, the importance of the mechanical function and related factors can be different, so the inspection cycle and detection parameters are also different. If there is any damage above, it can not meet the requirements of re-use, the bearing should not be used from the beginning, it is necessary to replace it.

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.