Home > Products > Pillow Block Bearing >

UKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARING

UKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARING
UKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARING
UKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARINGUKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARINGUKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARINGUKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARING
CategoriesPillow Block Bearing
AlbumView larger image
BrandSUNBEARING
ModelUKF206
Inside Diameter (mm)25
a (mm)108
e (mm)83
i (mm)18
FOB portDALIAN
Terms of PaymentL/C, T/T
Download DOC
Update Time2020-05-31
Detail Information

UKF206 Four-Bolt Flanged Housed Units with Adapter Sleeve 25mm SUNBEARING 

Product Description

UKF206 pillow block bearing

Product NamePillow Block Bearing UKF206
StructurePillow block BearingSealsRubber Seal
Bore Size25mmBore TypeSquare
Outside Diameter108mmDuty TypeMedium Duty, Heavy Duty, and Others
I(mm)18mmShaft Fastening:Adapter Sleeve
Ring MaterialChrome SteelLubrication Type:Oil; Grease;
Rolling Element MaterialChrome SteelSeries:UKF
Cage MaterialSheet SteelHousing TypeFlange
Housing MaterialCast IronMax. Tightening Torques (Nm) For Bearing Insert30
CertificateISO9001:2008FeaturesFeatures include mounting surfaces parallel to shaft axes & elongated bolt holes
ColourGreenBearing StructureSpherical Surface Ball Bearing
The Number Of  RowSingleWeight (Reference)1.3kgs
ClearanceC2 C0 C3 C4 C5ToleranceABEC1  ABEC3  ABEC5  ABEC7
Bearing No.UK206Housing No.F206

UKF206 Pillow Block Bearing Features

  • UKF206 pillow block bearing has a ball bearing insert UK 206, a cast iron bearing housing F 206 and a bearing adapter sleeve H2306
  • 4-hole flange bearing design allows installation in a variety of applications and is suitable for very high radial loads
  • The bearing housing is made of cast iron and therefore inexpensive and robust
  • Fixing of the inner ring by concentric adapter sleeve
  • Static misalignments can be compensated up to an angle of 2°
  • Two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
  • Lubricated for life; under normal operating conditions relubrication is not required
  • To protect against corrosion, the bearing housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil


UKF206 Pillow Block Bearing Drawing

UkF206 bearing drawingUKF206 pillow block bearing drawing

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service