Home > News
News
  • China has produced high carbon chromium stainless bearing steel
    China has produced high carbon chromium stainless bearing steel
    At present, China has produced high carbon chromium stainless bearing steel, the main steel number is 9Cr18;
  • Ball Bearing Specific Application
    Ball Bearing Specific Application
    In general, ball bearings are used in most applications that involve moving parts. Some of these applications have specific features and requirements:
  • How to Install a Pillow Block Bearing
    How to Install a Pillow Block Bearing
    1) Check and Clean the Shaft; 2) Position the Bearings on the Shaft; 3) Lightly Bolt the Housing to the Mounting Structure; 4) Establish the Final Mounting Position; 5) Securely Bolt the Housing to the Mounting Structure;
  • Installation method of deep groove ball bearing
    Installation method of deep groove ball bearing
    Installation method of deep groove ball bearing: i: press fit. ii: heating coordination
  • Installation of taper roller bearings
    Installation of taper roller bearings
    Tapered roller bearings are separable bearings. The inner and outer rings can be separated. The inner ring retainer assembly can be pressed onto the shaft. When the sleeve is pressed, it should be noted that one end of the sleeve should be placed on the end face of the outer ring and should not be placed on the inclined raceway surface.
  • FAG bearing group increases bank financing amount to expand business development
    FAG bearing group increases bank financing amount to expand business development
    FAG group, a debt-ridden auto parts maker, began refinancing in January 2012 and has increased the number of bank partnerships in an effort to expand the financing to 8 billion euros.
  • BEARING ROLLER PROCESSING
    BEARING ROLLER PROCESSING
    1.prepare productive materials 2.cold heading or hot heading 2.Turning processing 3.Soft grinding 4.Photofinishing
  • Outer  Ring  Processing
    Outer Ring Processing
    1.prepare productive materials 2.Forging 3.Turning processing 4.Soft grinding 5.heat-treat 6.Grinding processing 7.Photofinishing
  • What the hell is with the bearing packaging?
    What the hell is with the bearing packaging?
    When all of the parts are made, the bearing needs to be put together. First, the inner race is put inside the outer race, only off to one side as far as possible. This makes a space between them on the opposite side large enough to insert balls between them.
  • Welcome Ankit to visit our manufacturer
    Welcome Ankit to visit our manufacturer
    we have rich experiences in bearing processing and trade, toprovide clients with professional bearing application solutions. Bearings canbe produced without standard. The minimum inner diameter is 10 cm and theminimum outer diameter is 2 m.
  • How to choose SKF bearing?
    How to choose SKF bearing?
    It’s important to choose the right SKF bearings and need to think many parts of function and performance. At present, the request of all kinds of machinery machine and instrument of roll bearing of industry gradually become strict and increase. The request of bearings’ application and function become diversified. The machine equipped SKF bearings has an essential impact for the demand of SKF bearings.
  • I use a few small methods: deal needle roller bearings’ trouble
    I use a few small methods: deal needle roller bearings’ trouble
    The fault diagnosis technology of needle bearing mainly includes vibration diagnosis technology, iron spectrum diagnosis technology, temperature diagnosis technology, acoustic diagnosis technology, oil film resistance diagnosis technology and optical fiber monitoring diagnosis technology, among which vibration, iron shop and temperature diagnosis technology are widely used.
  • Check and troubleshoot in operation
    Check and troubleshoot in operation
    The inspection items in operation include rolling sound, vibration, temperature and lubrication state of the bearing. The specific conditions are as follows:
  • How to determine whether the bearing can be used again?
    How to determine whether the bearing can be used again?
    Check the condition of raceway surface, rolling surface and mating surface, as well as the wearing condition of the cage, etc. In addition, the degree of bearing damage, machine performance, importance, operating conditions, inspection period, etc., will be considered before determining whether the bearing can be used again or replaced. If bearing damage and abnormal conditions are found, find out the cause and develop countermeasures.
  • Discount and Promotion in September
    Discount and Promotion in September
    Discount and promotion in September
  • International competition! What is the potential of the African bearing market?
    International competition! What is the potential of the African bearing market?
    At present, the African demand of the bearing is only 1% of the word, but the development of automobile industry, construction industry and oil and gas industry and so on, which bring the new industrial vitality for African bearing market. Among them, South Africa is the biggest consumption country , mining bearing is the main. African bearing market is mainly occupied by the SKF,FAG and Japanese bearings.
  • Billets go up by 3,700! First - and second-tier steel price rise, steel price rise
    Billets go up by 3,700! First - and second-tier steel price rise, steel price rise
    June 13, the domestic steel market continued to slightly pull up, tangshan pufang billet tax factory price rose 10 to 3700 yuan per ton. In the new round of steel price adjustment, baosteel, sha steel, river steel and other mainstream steel mills have increased prices to varying degrees, driving up the cost of goods merchants. At the same time, low inventory and environmental factors, the market confidence is still.
  • The new composite bearing fills the blank in China
    The new composite bearing fills the blank in China
    A few days ago, China machinery industry federation organized and held the evaluation meeting of "hualong no.1 nuclear power unit reactor coolant pump thrust bearing" independently developed by Harbin electric power equipment co., LTD. At the review meeting, the project passed the review with the result of domestic unique and international leading review, indicating
  • Bearing clearance selection
    Bearing clearance selection
    In the same way as bearing lubrication, excessive or too little grease will cause bearing temperature changes, resulting in bearing damage; similarly, bearing clearance is too large or too small, the bearing's working life and even the stability of the entire equipment operation will be reduced.
  • What are the specific requirements for the packing of the bearing?
    What are the specific requirements for the packing of the bearing?
    After the bearing is manufactured and tested, it is cleaned and treated with rust, and then put into the inner package to achieve the purpose of waterproof, moisture-proof, dustproof, shock-proof, maintaining the quality and precision of the bearing as well as making it convenient to use and sell.
  • Bearing failure always bothers you because you don't understand the following.
    Bearing failure always bothers you because you don't understand the following.
    Bearing in the work, due to the influence of external or internal factors, the original matching clearance changes, the accuracy decreases, and even causes "bite dead" is called "clearance change failure. External factors such as excessive interference, improper installation, expansion caused by temperature rise, instantaneous overload, etc.
  • Bearing selection is not right, do not say the bearing quality bad
    Bearing selection is not right, do not say the bearing quality bad
    "" various types of bearings have different characteristics due to different designs. Due to the bearing's specific location of installation and the variability and complexity of application, bearing type selection without fixed mode can be used to adapt to a certain host specific location of installation and application conditions for bearing type selection, it is recommended to take comprehensive consideration according to the following main factors."
  • Adjust the bearing after installation
    Adjust the bearing after installation
    When installing, do not directly hammer the bearing end face and non-bearing face. Press the block, sleeve or other mounting tools should be used to make the bearing uniformly stressed. If the interference fit is larger, should put the bearing into the mineral oil in installation as soon as possible after heating to 80 ~ 90 ℃, strictly control the oil temperature does not exceed 100 ℃, in order to prevent the effect of tempering hardness decrease and recovery effect size.
  • Does your company organize activities frequently?--Tianmen canyon drift
    Does your company organize activities frequently?--Tianmen canyon drift
    Under such continuous high temperatures, the company organized a group of employees to travel to Tianmen canyon to escape the heat. It can not only make employees feel cool and refreshing, but also make them relax in a month of intense work, and make the company more cohesive. Does your company organize activities frequently?
  • Structural features of the four types of bearings
    Structural features of the four types of bearings
    Understanding the characteristics of bearings is the key to use of bearings effectivily
  • Timken (TKR) Scheduled to Post Earnings on Tuesday
    Timken (TKR) Scheduled to Post Earnings on Tuesday
    Timken (NYSE:TKR) will be posting its quarterly earnings results before the market opens on Tuesday, July 31st. Analysts expect Timken to post earnings of $1.07 per share for the quarter.
  • Roller Bearing installation
    Roller Bearing installation
    Whether the bearing is installed correctly affects the precision, life and performance. Therefore, the design and assembly department should fully study the installation of bearings. You want to install according to the job criteria. The standard operating items are usually as follows
  • How Does The Bearing Roll--- Treadmill
    How Does The Bearing Roll--- Treadmill
    How Does The Bearing Roll--- Treadmill.This article will give you a taste of the dynamic beauty of bearings and how they work in machines.
  • SUNBEARING Is Interviewed At The Exhibition--Rich Experience, Good Product
    SUNBEARING Is Interviewed At The Exhibition--Rich Experience, Good Product
    During the exhibition, CRTV---Chinese Reporting TV, a famous TV station, came to interview and make relevant reports. SUNBEARING is your best supplier in China.
  • How long have you not walked ten kilometers to see the scenery around you
    How long have you not walked ten kilometers to see the scenery around you
    How long have you not walked ten kilometers to see the scenery around you