Home / all / Deep Groove Ball Bearing /

16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING

16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING

16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING
16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING
CategoriesDeep Groove Ball Bearing
BrandSUNBEARING
Model16004
ColorSilver
Inner Diameter20mm
Outer Diameter42mm
Width8mm
ServiceOEM Service
SampleFree Sample
MOQ1
FOB portDALIAN
Terms of PaymentL/C, T/T, Paypal, Alibaba Trade Assurance
Download DOC
Update Time2022/8/11
Detail Information

16004 Thin Section Open Deep Groove Ball Bearing 20*42*8mm SUNBEARING

Bore diameter:
20 mm
Limiting speed
26000  1/min
Outside diameter:
42 mm
Reference speed
13800  1/min
Overall width:
8 mm
Min operating temperature, Tmin
-40 °C
Rows of Balls
 Single
Max operating temperature, Tmax
120 °C
Outer ring type:
Unsplit
Characteristic cage frequency, FTF
0.41 Hz
Internal clearance:
CN(Standard)
Characteristic rolling element frequency, BSF
5.51 Hz
Closure type:
Open
Weight:
 0.048 kgs
Basic dynamic load rating, radial
7910  N 
da min
22 mm
Basic static load rating, radial
4480  N
Da max
 40 mm
Fatigue limit load, radial
240  N
ra max
0.3 mm

16004 Bearing Short Description

16004 bearing thin-walled deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. Mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has the performance of a certain angular contact ball bearing and can withstand the combined radial and axial loads.

It can also be used to withstand pure axial loads when the rotation speed is high and thrust ball bearings are not suitable. Compared with other types of bearings of the same size, these bearings have a small friction coefficient and a high limit speed. However, it is not resistant to impact and unsuitable to withstand heavy loads.  

16004 Ball Bearing Features

After 16000  6700 6800 6900 series thin-walled deep groove ball bearings are installed on the shaft, the axial displacement of the shaft or the housing can be limited in the axial clearance range of the bearing, so axial positioning can be performed in both directions. In addition, this type of bearing also has a certain degree of self-aligning ability. It can still work normally when it is inclined by 2′ to 10′ relative to the housing hole, but it has a certain impact on the bearing life.

Bearing Retainer Selection

16000  6700 6800 6900 series thin-walled deep groove ball bearing cages are mostly steel stamping wave-shaped cages, or engineering plastics, copper solid cages can also be used. Large-scale bearings mostly use metal-made solid cages. According to different use environments, the sealed bearing can be added with special bearing grease.
Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content