Home / All / Thrust Ball Bearing /

Axial 51134M Thrust Ball Bearing 170*215*34mm

Axial 51134M Thrust Ball Bearing 170*215*34mm

Axial 51134M Thrust Ball Bearing 170*215*34mm
Axial 51134M Thrust Ball Bearing 170*215*34mmAxial 51134M Thrust Ball Bearing 170*215*34mmAxial 51134M Thrust Ball Bearing 170*215*34mmAxial 51134M Thrust Ball Bearing 170*215*34mmAxial 51134M Thrust Ball Bearing 170*215*34mm
CategoriesThrust Ball Bearing
BrandSUNBEARING Rolling Bearing Manufacturer
Model51134M
FOB portDALIAN
Terms of PaymentL/C, T/T, Paypal, Alibaba Trade Assurance
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

Axial 51134M Thrust Ball Bearing 170*215*34mm

51134m bearing

Product Specification

Bore diameter: 170 mm (Grease) Lubrication Speed 1 100 r/min
Outside diameter:  215mm (Oil) Lubrication Speed 1 600 r/min
Overall width: 34 mm Cage material: Steel
Bore type: Straight Bearing material: Steel
Outer ring type: Split Cage type: Inner Ring Guided
Internal clearance: C3 Precision rating: Not Rated
Closure type: Open Weight: 3.3KG
Lubrication hole type: Lubrication Groove & Hole D1 172 mm
Dynamic load capacity: 134 kN d1 213 mm
Static load capacity: 510 kN r min. 1,1 mm

51134M Thrust Ball Bearing Short Description

For forces in the shaft direction. The thrust bearing 51134 absorbs loads from an axial direction and can be dismantled. Main dimensions according to DIN 711.

Features

  • It consists of a shaft washer, a spherical housing washer, and a ball cage assembly
  • 51134M suitable for relatively high axial loads in one direction
  • Bearing cage material: sheet steel, high load-bearing capacity, and high strength; suitable for continuous high temperatures
  • Thrust bearings can be dismantled, the bearing washers and the ball cage assembly can be mounted separately
  • Manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings

Application

thrust ball bearing application

The use of thrust ball bearings: only suitable for parts that bear one axial load and low speed, such as crane hooks, vertical water pumps, vertical centrifuges, jacks, low-speed reducers, etc. The shaft ring, seat ring, and rolling element of the bearing are separated and can be assembled and disassembled separately.

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.