Home / All / Pillow Block Bearing /

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING
UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARINGUCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARINGUCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARINGUCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARINGUCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING
CategoriesPillow Block Bearing
BrandSUNBEARING Rolling Bearing Manufacturer
ModelUCF213
ColorGreen
Inner Diameter65 mm
Outer Diameter187 mm
Height69.17mm
ServiceOEM Service
SampleFree Sample
MOQ1
Unit PriceUS $ 7.57 / piece
FOB portDALIAN
Terms of PaymentL/C, T/T, Paypal, Alibaba Trade Assurance
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING

UCF213 bearing
Product Name
Pillow Block Bearing UCF213
Structure
Pillow block Bearing
Limiting speed Bearing with shaft tolerance h6
2350 r/min
Bore Size
65 mm
Housing material
Cast iron
Width Radial Insert Bearing To The Slot e (mm):
187 mm
Set screw
M10x1
Width Radial Insert Bearing a (mm):
69.7 mm
Hexagonal key size for set screw
5 mm
Designation, housing
F213
Recommended tightening torque for set screw
16.5 N·m
The Designation, Radial Insert Ball Bearing
UC213
Recommended diameter for attachment bolts, mm
16 mm
Bearing Type
Extended inner race with set screws
Recommended diameter for attachment bolts, inch
0.625 in
A
50 mm
T min.
-20 °C
Product weight:
5.35 kg
T max.
100 °C
Material
Cast iron housing, chrome steel bearing 
s1
32.55 mm
Dynamic Load Rating (Cr)
57.2 kN
S
25.4 mm
Static Load Rating (Cor)
40 kN
RG
19.700 mm
Fatigue load limit
1.7 kN
R1
34.5 mm

UCF213 Bearing Features

CF or SF Series 4 Bolt Square Cast Iron Housings: Bearing units supplied with a fully sealed bearing insert fitted in the cast iron housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required


Benefits: Cost-effective bearing/housing assembly, re-lubricate, replaceable insert, grub screw fixing

ucf bearing drawing
ucf bearing

Pillow Block Bearing

Pillow block bearing consists of an outer spherical ball bearing with seals on both sides and a cast (or stamped steel plate) bearing seat.


The internal structure of a seated outer spherical ball bearing is the same as that of a deep groove ball bearing, but the inner ring of this type of bearing is wider than the outer ring. The outer ring has a truncated spherical outer surface, which can automatically adjust the center when matched with the concave spherical surface of the bearing seat. Usually, there is a gap between the inner hole of this kind of bearing and the shaft, and the inner ring of the bearing is fixed on the shaft with a jack wire, an eccentric sleeve, or an adapter sleeve, and rotates with the shaft.


The bearing with seat has compact structure, convenient installation, and unloading, perfect sealing, suitable for simple support, and is often used in mining, metallurgy, agriculture, chemical industry, textile, printing, and dyeing, conveying machinery, etc.

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.