Home / All / Pillow Block Bearing /

UCT211 Take Up Housed Bearing 55*130*146mm SUNBEARING

UCT211 Take Up Housed Bearing 55*130*146mm SUNBEARING

UCT211 Take Up Housed Bearing 55*130*146mm SUNBEARING
UCT211 Take Up Housed Bearing 55*130*146mm SUNBEARINGUCT211 Take Up Housed Bearing 55*130*146mm SUNBEARINGUCT211 Take Up Housed Bearing 55*130*146mm SUNBEARINGUCT211 Take Up Housed Bearing 55*130*146mm SUNBEARINGUCT211 Take Up Housed Bearing 55*130*146mm SUNBEARING
CategoriesPillow Block Bearing
BrandSUNBEARING Rolling Bearing Manufacturer
ModelUCT211
ColorDark Green
Inner Diameter55mm
Width Radial Insert Bearing To The Slot e (mm):130 mm
Width Radial Insert Bearing a (mm):146 mm
FOB portDALIAN
Terms of PaymentL/C, Western Union, T/T, Paypal
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

UCT211 Take Up Housed Bearing 55*130*146mm SUNBEARING

UCT bearing
Product Name
Pillow Block Bearing UCT211
Structure
Pillow block Bearing 
Housing Type:
Radial Insert Ball Bearing
Bore Size
55 mm
Ring Material:
Chrome Steel
Width Radial Insert Bearing To The Slot e (mm):
130 mm
Rolling Element Material:
Chrome Steel
Width Radial Insert Bearing a (mm):
146 mm
Cage Material:
Sheet Steel
Shaft Fastening:
Grub Screws
 Lubrication Type:
Oil; Grease;
Grub Screw:
M10
Housing Material:
Cast Iron
Bearing No.:
UC 211
Max. Tightening Torques (Nm) For Bearing Insert:
22
Housing No.:
T211
The Number of Mounting Holes:
1
Product weight: 
4,000 Kg
Features
design as a radial bearing housing allows a displacement of the housing
Material
Cast iron housing, chrome steel bearing
Bearing Inner Dia. Shape
Cylindrical Bore Set Screw Type
Dynamic Load Rating (Cr)
7,890 N
 Tolerance: +0,3/0
22  mm
Static Load Rating (Cor)
5,223 N
Tolerance: 0/-0,8 
130  mm
Open Hole Width (o)
25.400 mm
T
102 mm
UCT211 bearing
UCT211 bearing drawing
UCT bearing

UCT211 Bearing Features

  • Consisting of a ball bearing insert UC 211 and a cast iron housing T 211

  • Design as a radial bearing housing allows a displacement of the housing

  • The housing is made of cast iron and therefore inexpensive and robust

  • The bearing insert has an extended inner ring with grub screws

  • The radial insert ball bearing housing unit is mounted on the shaft with two grub screws

  • Smooth running and good behavior with tilting due to the extended inner ring

  • Static misalignments can be compensated up to an angle of 2°

  • Two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter

  • Lubricated for life; under normal operating conditions relubrication is not required

  • Housing with an integrated lubrication hole

  • To protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil

UCT Pillow Block Bearing Application

Pillow block bearings are preferentially suitable for occasions that require simple equipment and parts, such as agricultural machinery, transportation systems, or construction machinery. It is mainly used to bear the combined radial and axial load based on the radial load. Generally, it is not suitable to bear the axial load alone. This type of bearing can be installed with an inner ring (with a full set of rollers and retainers) and an outer ring.


This kind of bearing does not allow the shaft to be inclined relative to the housing, and additional axial force will be generated under the radial load. The size of the axial clearance of this kind of bearing has a great influence on whether the bearing can work normally. When the axial clearance is too small, the temperature rise is higher; when the axial clearance is large, the bearing is easily damaged.

Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.